| |
| The TP Series of single acting triplex high pressure pump is rated for as high as 800HP and 70MPa in the oilfield servicing applications such as well flushing, well cementing and well fracturing. It is also widely used in pressure testing and wellhead pressure relief. The field proven design is compact, durable and efficient. It can be skid mount, truck mount; chain-driven or gear-driven as required. Since compatible with industrial standards, it matches with Arison BY520, HT750D, HT5961 and HT6061 transmission cases. To optimize its performance and service life, it is preferable to work at a maximum of 70-80% of it full power and below 270 strokes/min. The performance parameters as listed below corresponds to intermittent work of less than three hours a day. |
Technical Specification :
|
Max input power： |
800HP |
Efficient water pump： |
700HP |
|
Max input speed： |
1530RPM |
Stroke length： |
7" |
|
Max input twisting moment： |
12700N.m |
Diameter of plunger： |
5" |
|
Drive ratio： |
4.5：1 |
Max work pressure： |
55Mp |
|
Machinery efficiency of pump： |
0.90 |
Max displacement： |
2020L/min |
|
Max thrust of plunger： |
627KN |
|
|
|
Model TP800 high-pressure pump is mainly used for well cementing, well fracturing and well and acid flushing, it maybe used in industrial field if transporting high-pressure liquid. |
Property Parameters :
|
Diameter
（in） |
Performance parameter |
Strokes Per Minute |
Dimensions
（mm） |
Weight
(Kg) |
|
50 |
100 |
150 |
200 |
250 |
300 |
2080x1580x990 |
3600 |
|
33/4 |
L/min |
190 |
380 |
570 |
760 |
950 |
1140 |
|
Mp |
92.0 |
86.0 |
57.0 |
43.0 |
34.0 |
28.0 |
|
4 |
L/min |
210 |
430 |
640 |
860 |
1080 |
1290 |
|
Mp |
80.0 |
76.0 |
50.0 |
38.0 |
30.0 |
25 |
|
41/2 |
L/min |
270 |
540 |
820 |
1090 |
1360 |
1640 |
|
Mp |
64.0 |
60.0 |
40.0 |
30.0 |
24.0 |
20.0 |
|
5 |
L/min |
330 |
650 |
1010 |
1350 |
1680 |
2020 |
|
Mp |
55.0 |
50.0 |
32.0 |
24.0 |
19.0 |
16.0 |
|
Brake power (HP) |
450 |
800 |
Pump Dimension :
|
